Moto Guzzi 1200 Sport Corsa Limited Edition
The Moto Guzzi 1200 Sport is now available in a special edition red, white and gold ‘Corsa’ paint scheme at no extra cost.
The Corsa features a two-tone red & white paint job, complemented by gold detailing and a two-tone saddle.
The 1200 Sport is powered by the same smooth 1151cc V90 8v engine found in the new Stelvio NTX & Norge GT, delivering 102bhp @ 7,000rpm and 77ft.lb of torque.
The supple handling is delivered through Marzocchi forks adjustable for pre-load, compression and rebound damping along with a similarly multi adjustable rear shock. Lightweight Marchesini 3-spoke wheels complement the handling and quality feel.
Braking is taken care of by Brembo with twin 320mm discs with 4-piston radial calipers at the front and a single 298mm disc at the rear.
Shaft drive, a bikini fairing, a well-padded seat and lots of space for a pillion (under the removable seat cover) add practicality, making the 1200 Sport an exceptional sports tourer.
Moto Guzzi 1200 Sport Technical specifications
Engine type: Four-stroke V 90 twin
Cooling: Air and oil cooled with independent cooling pump
Capacity: 1,151cc
Bore and stroke: 95 x 81.2 mm
Compression ratio: 11 : 1
Maximum power output: Over 77 kW (105 CV) at 7,000 rpm
Max Torque: Over 105 Nm at 6,750 rpm
Exhaust system: Stainless steel two-into-one 3-way catalysed with Lambda probe.
Homologation: Euro 3
Gearbox: 6 speed
Gear ratios: 1st 17/38 = 1: 2.235, 2nd 20/34 =1: 1.700, 3rd 23/31 = 1: 1.348, 4th 26/29 = 1: 1.115, 5th 31/30 = 1: 0.968, 6th 29/25 = 1: 0.862
Lubrication: Oil bath.
Primary drive: Helicoidal gears, ratio 24/35 = 1 : 1.4583
Final drive: CA.R.C reactive drive; double universal joint with floating bevel gear, ratio 12/44 = 1 : 3,666
Clutch: Single plate with integrated flexible couplings
Frame: tubular cradle, high tensile steel
Wheelbase: 1,495 mm
Trail: 120 mm
Rake: 25°
Steering angle: 32°
Front suspension: telescopic hydraulic fork with Ø 45 mm spring preload and rebound damping adjustable. Wheel travel: 120 mm
Rear suspension: single arm suspension with progressive linkage, rear shock absorber adjustable in rebound and pre-load (hydraulic). Wheel travel: 140 mm
Front brake: twin stainless steel floating disc, Ø 320 mm, 4 opposed piston
Rear brake: single steel fixed disc, Ø 282 mm, floating caliper with 2 parallel pistons
Wheels: three spokes, light alloy wheels, gravity die-casting
Front tyre: 120/70 ZR17”
Rear tyre: 180/55 ZR17”
Length: 2,195 mm
Width (handlebars): 840 mm
Height (windshield): 1,160 mm
Seat height: 800 mm
Minimum ground clearance: 185 mm
Fuel tank capacity: 23 litre (4 litre reserve)
